I found this cute shirt pattern on line at Paper Crafts Magazine and thought it would be fun to try for Fathers Day. DP is from BasicGrey Periphery 6 x 6 paper pad. I have attached the pattern, but here are the step by step directions. Cut CS 5 1/4" x 8 1/2". Score at 4 1/4" with the paper at landscape orientation. cut 3/4" off the top left side of the card to the score line in the middle. On the taller right hand side, cut a slit in 1/4" deep and 3/4" from the top of card. Measure in 3/4" from each end of the same side you cut the 1/4" slits and mark with a pencil at the top of the card. Cut a diagonal from the pencil mark to the inside of the 1/4" slit so it looks like the diagram. Fold the card in half with the taller section on the inside. Cover the shorter front part with DP. Cut 2 collar pieces 7/8" x 1 7/8". Adhere to the card front only lining up the top corners with the top of the inside of the card. Cut a tie by hand and attach. Use adhesive along the bottom opening and side opening to create a pocket. Tag insert is 4 1/4 x 2 3/4" finished size.
1 week ago